Formula Sound FSM-600 Black

SKU
241291
1.599,00 €
Inkl. 19% Steuern, exkl. Versandkosten

Der Artikel Formula Sound FSM-600 Black ist nicht bei Elevator verfügbar.
Bei Fragen zum Artikel kannst du dich gerne via info@elevator.de oder über unsere Hotline (+49) 0251 / 60 99 311 bei uns melden.

Passendes Zubehör für den Artikel Formula Sound FSM-600 Black findest du hier.

Passende Alternativen für den Artikel Formula Sound FSM-600 Black findest du hier.

  • 6 Twin Input Channels
  • Less Than 0.005% Distortion
  • Mic Compressor
The FSM-600 Mixer is a compact fixed format stereo production mixer. The design allows the unit to accept two microphone inputs and ten stereo music inputs. Unlike the majority of fixed format mixers on the market all connectors are fitted to the back face which allows unrestricted access when the mixer is fitted through a work top or in a rack.

Technische Daten:

  • 6 Twin Input Channels
  • Less Than 0.005% Distortion
  • Mic Compressor
  • Voice Over Control
  • Available in Black or Red
  • LEDs and label area clearly show which input is in use.
  • Gain control sets input gain level. Check by selecting PFL and adjusting so that VU meter just peaks into red.
  • 3 band equalisation provides ±10dB control, internal jumpers allow selection of +/-5dB or no EQ
  • Auxiliary send allows a separate mix of channels to auxiliary output (stereo bus). Internal jumpers allow the auxiliary pot to function pre or post channel fader.
  • Mute push button cuts the channel signal when depressed (switch illuminated). It does not cut the auxiliary send.
  • Limit push button routes the microphone signal via a built in compressor/limiter to keep dynamics under control. An internal jumper disables the switch forcing the mic to always be routed to the limiter. This switch has no effect on the line input.
  • PFL (pre-fade listen) routes the channel signal to the monitoring system (V.U. meter and phones). If more than 1 PFL is selected the sum is routed to the monitoring system. If no PFL is selected the monitoring system reads main output.
  • Input Channels 3 and 6
  • Input selector switch selects input used. A = input A B = input B. Input B is always a stereo line input (internal jumpers selects input A to be either RIAA magnetic cartridge or a standard line input. (phono connectors)).
  • LEDs and label area clearly show which input is in use.
  • Gain control sets the input gain level. Check by selecting PFL and adjusting so that VU meter just peaks into the red.
  • 3 band equalisation provides ±10dB control, internal jumpers allow selection of ±5dB or no E.Q.
  • Auxiliary send allows a separate mix of channels summed to the auxiliary output (stereo bus). Internal jumpers allow the axiliary pot to function pre or post channel fader.
  • XF A and XF B (Illuminated push buttons) assign the channel to the cross fader if neither button is pressed the channel is fed via the stereo buss to the output and the cross fader will have no effect on this channel if both buttons are pressed the channel will be assigned to A only
  • PFL (pre-fade listen) routes the channel signal to the monitoring system (V.U. meter and phones). If more than 1 PFL is selected the sum is routed to the monitoring system. If no PFL is selected the monitoring system reads main output.
  • 60mm channel fader.
Alternativen:
© 2024 Elevator